Grainy paints / What do you use?

Acrylic Marbling
Griffin.benko
Posts: 8
Joined: Mon Jan 09, 2017 12:26 pm

Grainy paints / What do you use?

Postby Griffin.benko » Mon Jul 31, 2017 6:02 pm

I currently use Golden Acrylic paints and distilled water for marbling. My size is made using Jacquard carrageenan at a ratio of 18g per gallon of water. I often find that some colors result in a very grainy pattern, almost like a broken emulsion. I notice it most in my black but it happens with others as well. Is there something I can do to prevent this?

I will be making my size a bit thicker to see if the paint will spread less. I recently purchased a new black and it had the same results as the other tube which I bought 2 years ago.

Alternatively, does anyone have suggestions for other paints/inks to marble with? I'm growing frustrated with my results from Golden Acrylics and would like something that yields higher quality results.

Thanks for any help!

ScottC
Posts: 10
Joined: Fri May 19, 2017 2:16 pm

Re: Grainy paints / What do you use?

Postby ScottC » Sat Aug 12, 2017 3:00 pm

Yes, I often see this too... I'm using the same paints.

Marblemad
Posts: 6
Joined: Thu Aug 03, 2017 11:13 am

Re: Grainy paints / What do you use?

Postby Marblemad » Sun Aug 13, 2017 12:34 pm

Hi
I use jacquard marbling paints
I also use the createx airbrush paints which can be diluted with jacquard gall or distilled water
None of those are grainy but I always struggle with black as it seems to cling to carrageenan so when I lift my leather from the tray it gets covered in the black sludge but that might just be a leather problem

ScottC
Posts: 10
Joined: Fri May 19, 2017 2:16 pm

Re: Grainy paints / What do you use?

Postby ScottC » Sun Aug 13, 2017 7:06 pm

Yes, I also find that the black washes off much more easily than the other paints.

Griffin.benko
Posts: 8
Joined: Mon Jan 09, 2017 12:26 pm

Re: Grainy paints / What do you use?

Postby Griffin.benko » Fri Apr 27, 2018 9:32 pm

Still find myself having issues with Golden Fluid acrylics breaking apart on the surface of my size. Today, they broke apart on a fresh bath and continued to do so after working a bit. Sometimes, this problem does not happen at all however.

Attached are a few photos of what I'm talking about. Not sure how to fix this problem. It seems to happen with many colors. Generally, the first color I use will break up but it is not the only one to do so. Here's what I'm using:

Size - 5 L water, tap: 1/4c Carrageenan
Alum - 1 T Alum: 1c Water, tap
Paints - 1 T water, distilled: 10 drops Golden Fluid Acrylics
I use both brushes and eyedroppers with the paints and it happens with both.
Attachments
IMG_20180427_230510.jpg
IMG_20180427_230510.jpg (115.71 KiB) Viewed 1791 times
IMG_20180427_230459.jpg
IMG_20180427_230459.jpg (129.56 KiB) Viewed 1791 times
IMG_20180427_230451.jpg
IMG_20180427_230451.jpg (145.16 KiB) Viewed 1791 times

SouthHillKaren
Posts: 10
Joined: Thu Jun 29, 2017 11:12 am

Re: Grainy paints / What do you use?

Postby SouthHillKaren » Tue May 01, 2018 5:34 pm

I use mostly Golden Fluid Acrylics and Jacquard Air Brush colors, on a methylcel vat. I have noticed that black slides off easier than other colors, also red. I assume it is a characteristic of those particular colors. Each color is a tiny bit different chemically. I mix Jacquard Air Brush black with Golden Carbon Black fluid acrylic, works pretty well. I am trying different strengths of alum on the paper, maybe more or less will help with both blacks and red. Mostly, I find that freshly mixed black solution and a nice fresh vat of methylcellulose gives me good results. I have been trying to increase the grainy look, so have been experimenting with helping it to happen. Results so far: grainy result is definitely encouraged by hotter air, and air in movement over the vat (pigment on surface dries and shrinks into tiny bits, but will stick to the alum on the paper) and if the pigment mix and/or vat have been aged. I have one bottle of blacksolution which is several weeks old, and it seems good at clumping up. I do wonder if it would be better to buy smaller bottles of the original black acrylic. Perhaps even limited exposure to air causes the pigment to "age" in the bottle?

RodrickTe
Posts: 1
Joined: Tue Apr 17, 2018 2:58 am

Re: Grainy paints / What do you use?

Postby RodrickTe » Tue Nov 13, 2018 5:46 am

That might very well be it, Karen. This happens to me a lot as well and now that I'm thinking about it, I never bought small bottles of the black acrylic. I'll try this out next time I need to buy some.


Return to “Acrylic Marbling”

Who is online

Users browsing this forum: Google [Bot] and 1 guest